A neutral white exterior and door with a beige interior lining color.
Half Height Door
The door is interlocked and is made to match the finish of the lift. Two Remote Controls call and send the lift remotely and can also carry heavy or awkward items between floors.
All Stiltz Home Elevators carry a standard two-year parts warranty. Safe Home Pro provides a one-year warranty on labor.
Internal LED Downlights
These are programmed to turn on once the user has entered the lift and remain on for the entire journey.
Battery Back Up System
If there is a power outage while using the lift it will descend to the lower level of the home and wait until the power comes back on.
Full Height Light Curtain
Light Curtain when fitted with half height door.
In the very unlikely event that the lift stops while you are travelling in it, help is just a phone call away.
Full-height motion sensor is situated at the entrance of our elevators (unless a full height door is chosen). If this barrier is crossed the lift will immediately stop.
The Safety Lid Plug is a crucial feature that plugs the aperture in the floor when the elevator is in the downstairs position. It is strong enough to stand on and you can place your original flooring on top to blend in.
Key Switch Operation
This feature allows the owner to isolate the lift if the need arises. This is commonly used when going away on vacation or when children are around.
Top & Bottom Safety Pans
Using our obstruction sensing covers, a Stiltz Home Elevator can detect objects above or below the lift, causing it to immediately stop.
Operating a Stiltz residential elevator requires constant pressure to the controls. This allows the user to ‘drive’ the lift and feel in total control.
Weight Limit Sensors
Our Duo elevators are limited to 375lbs (170kg). The lift detects anything exceeding this limit and will not travel. Out Of Balance Sensors Sensors will detect if the lift is ever out of balance and prevent the unit from travelling.
Fall Arrest Mechanism
This patented system prevents the car from falling in the unlikely event of the steel ropes going slack.
Emergency Stop Button
This button is front and center for the user in the event of an emergency.
Over Speed Detection
The elevator uses an optical sensor to detect the speed of travel. If this increases beyond a certain speed, the sensor will stop the lift from travelling in that direction.